| |
|
|
|
1. On this form the breaks are moved
higher, the field test results are lowered
|
| |
|
|
|
2. Bold type and dividing lines
make results stand out
|
| |
|
|
|
3. Some material specifications
are reported on this custom form
|
| |
|
|
|
4. This is very close to the standard
form, showing how a very professional form can be developed with
just a few "tweaks".
|
| |
|
|
|
5. Forms can allow room for letterhead
and have automatic break remarks
|
| |
|
|
|
6. Checkboxes that show if the test
conformed to specifications or not were added to this form
|
| |
|
|
|
7. This custom form presents all
data in tables with borders
|
| |
|
|
|
8. This form shows how checkboxes
can be used for the type of test being reports as well as compliance
with specs
|
| |
|
|
|
9. A graph showing the strength-time
trendline was added to this custom form
|
| |
|
|
|
10. Curing conditions can be reported
with checkboxes
|
| |
|
|
|
11. A standard form with a few checkboxes
and logo added
|
| |
|
|
|
12. The table of break results can
be rotated
|
| |
|
|
|
13. The 28 day average strength
can be automatically calculated and shown on the form
|
| |
|
|
|
14. A border and dividing lines
help organize the report
|
| |
|
|
|
15. This custom form can be tri-folded
and immediately mailed in an envelope with a clear address window
|
| |
|
|
|
16. Five more beams are shown on
this custom form
|
| |
|
|
|
17. Up to 20 breaks can be reported
on this custom form
|
| |
|
|
|
18. Rights and restrictions can
be added at the bottom of forms
|
| |
|
|
|
19. A variation of the break legend
was added for this form
|
| |
|
|
|
20. Checkboxes can be used extensively
for reporting field test conditions
|
| |
|
|
|
21. Detailed mix composition is
reported on this form
|
| |
|
|
|
22. This unique report layout has
a break type legend right in the break table
|
| |
|
|
|
23. Borders and bars can be used
to make a distinctive looking report
|
| |
|
|
|
24. Shading effectively groups this
report's data
|
| |
|
|
|
25. Additional mix information and
rotated labels are used on this variation of the standard form ADVANCED
|
| |
|
|
|
26. Slight variation of the standard
form, adding lines and a logo
|
| |
|
|
|
27. Indenting and fonts are used
to make a sharp looking report
|
| |
|
|
|
28. This standard report format
provides results in both US and Metric units
|
| |
|
|
|
29. Cast
Concrete Cylinder form for submittal to California Division of State
Architect. Patterned after their form DSA 204. The set of 6 DSA
forms can be downloaded from the QC-Concrete
forms download page.
|
| |
|
|
|
30. Cast Mortar Cylinder form for
submittal to California Division of State Architect. Patterned after
their form DSA 204. The set of 6 DSA forms can be downloaded from
the QC-Concrete forms download
page.
|
| |
|
|
|
31. Cast Grout Cylinder form for
submittal to California Division of State Architect. Patterned after
their form DSA 204. The set of 6 DSA forms can be downloaded from
the QC-Concrete forms download
page.
|
| |
|
|
|
32. Masonry Unit form for submittal
to California Division of State Architect. Patterned after their
form DSA 205. The set of 6 DSA forms can be downloaded from the
QC-Concrete forms download page.
|
| |
|
|
|
33. Mortar Cube form for submittal
to California Division of State Architect. It is patterned after
their typical forms, but there is no form specified by DSA. The
set of 6 DSA forms can be downloaded from the QC-Concrete
forms download page.
|
| |
|
|
|
34. Grout Prism form for submittal
to California Division of State Architect. It is patterned after
their typical forms, but there is no form specified by DSA. The
set of 6 DSA forms can be downloaded from the QC-Concrete
forms download page.
|
