GEOSYSTEM Software
 
spacer
spacer
spacer

 

Additional Lab. Testing Report Forms

Download these files into your GEOSYSTEM for Windows hard disk subdirectory, then use the "Setup" dialog for the appropriate module to choose the new file as your Report Form.  Sorry that we don't have previews of these, but they're SMALL files -- just download them and try them out!

Note: Internet Explorer improperly ignores established file type standards (RFC2616) -- if you click on the .NAM file that you want to save you'll see a preview of the file instead of a "Save to" dialog.

To save files with .NAM extensions, right-cick on the file, select "Save Target As...", navigate to your GEOSYSTEM for Windows installation directory then, most importantly, change the "Save As type" selection to "All Files" before hitting the "Save" button.

PROCTOR (Moisture-Density Test) Forms

PRGSYDAT.TDT
PRGSYDAT.NAM

Adds "Date" to PRGEOSYS. Corrected 18.Jul.01 to allow more space for testing remarks. DOWNLOAD BOTH FILES to your GEOSYSTEM for Windows directory -- make sure to read the Internet Explorer note at the top of this page!.
PRSNGLEA.TDT
PRSNGLEA.NAM

Similar to "PRSINGLE", adds fields for listing the %< the #10, #40, #60 and #200 sieves on the report.  DOWNLOAD BOTH FILES to your GEOSYSTEM for Windows directory -- make sure to read the Internet Explorer note at the top of this page!.

PRNEWSNG.TDT
PRNEWSNG.NAM

The "PRSINGLE" form included with PROCTOR modules sold prior to 15.Jun.00 did not include a space for listing the sample number: This new version is identical to the original "PRSINGLE" except that it adds a space for printing the sample number. DOWNLOAD BOTH FILES to your GEOSYSTEM for Windows directory -- make sure to read the Internet Explorer note at the top of this page!.

PRASTM.TDT
PRASTM.NAM

This form was designed to better comply with ASTM reporting requirements. DOWNLOAD BOTH FILES to your GEOSYSTEM for Windows directory -- make sure to read the Internet Explorer note at the top of this page!.

PRASTMPJ.TDT
PRASTMPJ.NAM

Identical to PRASTM (above) but allows only one line of project description information so that long (>12 characters) project numbers may be entered. DOWNLOAD BOTH FILES to your GEOSYSTEM for Windows directory -- make sure to read the Internet Explorer note at the top of this page!.

PRGSY15.TDT
PRGSY15.NAM

PRGEOSYS form, modified to provide room for 15 character project numbers. DOWNLOAD BOTH FILES to your GEOSYSTEM for Windows directory -- make sure to read the Internet Explorer note at the top of this page!.



CONS (Swell/Consolidation Test) Forms

CSAPPROV.TDT
CSAPPROV.NAM
Compression form: lists initial and final: densities, moisture contents, saturation and void ratio; includes boxes for writing "Drawn By", "Checked By" and "Approved By". DOWNLOAD BOTH FILES to your GEOSYSTEM for Windows directory -- make sure to read the Internet Explorer note at the top of this page!.
CSCHART.TDT
CSCHART.NAM
Simple compression form featuring a large compression chart. DOWNLOAD BOTH FILES to your GEOSYSTEM for Windows directory -- make sure to read the Internet Explorer note at the top of this page!.
CSTIME4T.TDT
CSTIME4T.NAM
Companion time-rate form to "CSCHART" -- select from the "Time Rate Reports" Setup button. DOWNLOAD BOTH FILES to your GEOSYSTEM for Windows directory -- make sure to read the Internet Explorer note at the top of this page!.

CSASTM.TDT
CSASTM.NAM

This form was designed to better comply with ASTM reporting requirements. DOWNLOAD BOTH FILES to your GEOSYSTEM for Windows directory -- make sure to read the Internet Explorer note at the top of this page!.



GRN-SIZE (Grain Size Distribution) Forms

GSCHART.TDT
GSCHART.NAM
Simple form, uses two separate charts to show two grain-size curves per page. DOWNLOAD BOTH FILES to your GEOSYSTEM for Windows directory -- make sure to read the Internet Explorer note at the top of this page!. New version posted 7.Dec.2006 that corrects a spelling error (LIQUD LIMIT).
GSGSYSNM.TDT
GSGSYSNM.NAM
Similar to "GSGEOSYS", but replaces the AASHTO column with "NM" and "DATE" columns. DOWNLOAD BOTH FILES to your GEOSYSTEM for Windows directory -- make sure to read the Internet Explorer note at the top of this page!.
GSHYDROM.TDT
GSHYDROM.NAM
Similar to "GSSINGLE", also prints the percentage smaller than each calculated hydrometer diameter.  REQUIRES GRN-SIZE NEWER THAN JUNE 24, 1997. DOWNLOAD BOTH FILES to your GEOSYSTEM for Windows directory -- make sure to read the Internet Explorer note at the top of this page!.
GSPORT5.TDT
GSPORT5.NAM
This form is identical to "GSGEOSYS", but supports 5 curves instead of three.  DOWNLOAD BOTH FILES to your GEOSYSTEM for Windows directory -- make sure to read the Internet Explorer note at the top of this page!.
GSCOE.TDT
GSCOE.NAM
This form implements the US Army COE's ENG form 2087.  DOWNLOAD BOTH FILES to your GEOSYSTEM for Windows directory -- make sure to read the Internet Explorer note at the top of this page!.
GSPASSPI.TDT
GSPASSPI.NAM
This form is identical to "GSPASS", but replaces the "PL" column with a "PI" column.  DOWNLOAD BOTH FILES to your GEOSYSTEM for Windows directory -- make sure to read the Internet Explorer note at the top of this page!.
GSGEOPI.TDT
GSGEOPI.NAM
This form is identical to "GSGEOSYS", but replaces the "PL" column with a "PI" column. DOWNLOAD BOTH FILES to your GEOSYSTEM for Windows directory.
GSSNGRTD.TDT
GSSNGRTD.NAM
This form is identical to "GSSINGLE" except that the grain size chart is scaled in terms of "percent retained" instead of  "percent passing".  DOWNLOAD BOTH FILES to your GEOSYSTEM for Windows directory -- make sure to read the Internet Explorer note at the top of this page!.

GSASTM.TDT
GSASTM.NAM

This form was designed to better comply with ASTM reporting requirements. DOWNLOAD BOTH FILES to your GEOSYSTEM for Windows directory -- make sure to read the Internet Explorer note at the top of this page!.

GSFINES.TDT
GSFINES.NAM

This form is identical to "GSPASS" except that it also lists the % fines (i.e., SILT+CLAY). DOWNLOAD BOTH FILES to your GEOSYSTEM for Windows directory -- make sure to read the Internet Explorer note at the top of this page!.

GSPASS Without AASHTO

This form is identical to "GSPASS" except that it does not include a column for the AASHTO classification; instead, all three Atterberg values (LL, PL and PI) are listed. Download the file to the hard disk subdirectory where the program is installed (under Windows XP), or to c:\users\public\documents\geosystem (under Vista or Windows 7), then restart your GEOSYSTEM program.



LIMITS (Atterberg Limits) Forms:

LIMAPROV.TDT
LIMAPROV.NAM
"LIMBASIC" with boxes for writing "Drawn By", "Checked By" and "Approved By". DOWNLOAD BOTH FILES to your GEOSYSTEM for Windows directory -- make sure to read the Internet Explorer note at the top of this page!.
LIMASTM.TDT
LIMASTM.NAM
This form was designed to better comply with ASTM reporting requirements. DOWNLOAD BOTH FILES to your GEOSYSTEM for Windows directory -- make sure to read the Internet Explorer note at the top of this page!.
LIMGEOAL1.GEZIP This is a version of LIMGEOAL that only reports one Atterberg test per page -- it was created due to the demand from clients to limit their reports to a single test. To install it, save the LIMGEOAL1.GeZip file to the hard disk subdirectory where the program is installed (under Windows XP), or to c:\users\public\documents\geosystem (under Vista or Windows 7), then restart your GEOSYSTEM program.
 

Copyright 2001-2014 GEOSYSTEM Software • Contact UsNewsletter SignupSurveysSend Us Your CommentsSite Map